The Motobilt Jeep JK spare tire delete kit and tag mount bolts in place of the factory spare tire mount on both the 4 door and 2 door.The kit also reuses the factory hardware. The part is fabricated from 14 GA P and O steel plate. Some people refer to this part as a tramp stamp. One of the main features of this part is the raised section where the tag bolts on. This allows the vent to stay in place on the tailgate. The tag mount surface has a notch cut to allow for tag light wiring to clear. The bottom side of the plate features an integrated bottle opener. You just never know when you may need a bottle opener when out camping.
- Motobilt spare tire delete kit and tag mount
- Jeep Wrangler JK and JKU 2 door and 4 door
- Black Powdercoat
- Fabricated from 14 GA P and O steel plate
- Raised section where the tag bolts on
- Tag mount surface has a notch cut to allow for tag light wiring to clear
- ORO LED tag light kit available
- Sold as kit
- Reuses the factory hardware
- The bottom side of the plate features an integrated bottle opener
- Tag Light LD-PL6 is included.
Motobilt offers: Off Road Only LiteDOT Plate Light with 6 foot disconnect able harness Please see below for more information. This is a LiteDOT™ Plate Light with a six foot disconnectable harness and solder seal connectors for splicing into the wiring harness.
The LiteDOT™ Plate Light's rugged design is completely sealed, vibration and water proof. It is ideal for an off road vehicle, trailer, motor home or any other rugged use vehicle, such as a dump truck.
It mounts on any license plate with mounting holes 7" on center. The stainless steel bracket mounts directly behind the license plate. The polycarbonate housing extends out over the edge about two inches.
Ultra-bright white LED's are used to illuminate the license plate. The housing also has three rear facing red LED's that can be wired as a third brake light when the license plate is mounted in the center of the vehicle.
The wiring harness on this version is designed for use with the Motobilt Tag delete kits . MB1044-P, MB1047P, MB2025, and MB1077 which positions the LiteDOT™ Plate Light in the center of the spare tire. The six foot harness features a connector for easy disconnection when removing the spare tire.